**Caution** A quick word of warning, if you have a pair of goggles around, put them on! Love isn't the only thing in the air - there are bits of flying metal, too ;).
What you'll need:
- Wire - any gauge. I used 0.8mm for these.
- Round nosed pliers
- Wire cutters
- Optional: A file or bead reamer to smooth the ends of you wire
Cut as many lengths of wire as you require. The length is up to you, but the ones shown here are about 2cm.
If your wires have rough ends, now is the time to file them.
Take a length of cut wire, and bend it in the middle with your round nosed pliers into a V shape.
Take your V shape and with your pliers curl one end (like you would for a loop). Bend the wire until you've made a half circle (roughly!).
Repeat step three on the other end of your V, and you have a heart! You may need to tinker a bit with the shape to get it just right.
An added effect...
You can leave your links as in Step 4, or for an extra touch, you can hammer your links for texture. Sometimes hammering can be a bit tricky on silver plated wire, so I like to gently "smoosh" the wire with a flat area of my pliers for the hammered look.
Now your links are finished and ready to be made into chains, links, and charms. The possibilities are endless!